York White Washed Oak

Solid Wood | Brushed and Matte Urethane

York White Washed Oak Solid Wood Flooring
York White Washed Oak Solid Wood Flooring
York White Washed Oak Solid Wood Flooring

York White Washed Oak

Solid Wood | Brushed and Matte Urethane

Out of stock

SKU: 36-YWW-150

Out of stock

Add to Wishlist

Make an Appointment

York White Washed Oak

Our York White Washed Oak floor is solid oak wood flooring that evokes the sandy tones and airy feel of the seaside. This light oak flooring has bright flaxen hues with striking knots on a subtly textured hardwood floor. A fresh and stylish twist on traditional solid oak flooring, this white-washed alternative is perfect for light interiors - making it an ideal flooring for contemporary living areas that still want to have the classic feel of a solid floor beneath their feet. York White Washed Oak is guaranteed for 100 years.

Additional information

Pack Size

21.31ft²

Bevels on Edges

All 4 edges

Core Material

Oak

Finish

Brushed & Matte Urethane

Fitting Method

Glued, Nailed

Floor Color

Light, Natural

Floor Grade

Rustic

Floor Joint

Tongue & Groove

Floor Thickness

3/4 in

Floor Type

Solid Wood

Hardness

Hard

Length

11 3/4 in – 63 in

Planks per Pack

Variable

Species

Oak

Underfloor Heating

Not Advised

Width

6 in

Plank Lengths

Random Length Planks

WOOD FLOORING FAQS

These are the questions we get asked most often about our floors and their features.

How do I clean this lacquered York floor?

To clean your lacquered York floor, simply use our specially formulated cleaning liquid for lacquered floors. Alternatively, use a well-wrung mop (water only). We do not recommend using a steam mop or any other solutions on our floors.

Is solid wood flooring suitable for underfloor heating?

No – We would not advise using underfloor heating with solid wood flooring. This is because solid hardwood flooring tends to expand and contract more easily to changes in temperature and therefore they are not stable enough to deal with the temperature changes that underfloor heating will cause.

Does solid wood flooring need to acclimatise before being installed?

Yes – We recommend you let your solid wood floor acclimatise for 5 to 7 days before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.

Can I float York solid wood flooring?

No – York solid wood flooring can only be installed by either fully glueing it down, or by secret nailing it down.

What condition should the subfloor be in?

The surface immediately beneath a Woodpecker natural wood floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding
3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause wood flooring to warp or shrink.

What if I am installing over floor boards?

If installing over floorboards, ensure the voids beneath have a height of 600mm from the ground to the bottom side of the joists. We recommend using a suitable Woodpecker damp proof membrane to protect the floor from moisture. Check that the voids are vented around the perimeter and that these vents are positioned to allow air flow under the entire floor. As a rule of thumb, all venting should equal a minimum of 1.5% of the total m2 of the installation. Keep the vents open throughout the year too.

Is solid wood flooring suitable for bathrooms?

No – solid wood flooring is not suitable for bathrooms or wet-rooms. For waterproof flooring, view our Brecon range.

What is colour variation and how should I lay the planks with colour variation?

Colour variation is the natural beauty and variations in colour that occur in real wood.  To ensure the overall effect has a good balance of colour and details, take care to blend planks from several packs across the entire room.

What does 'pack includes random lengths' mean?

This means that your York floor will include multiple different lengths of floors within each pack, rather than boards of the same length. This is down to product availability as it is one solid piece of timber.

How thick is York flooring?

York is a solid piece of 18mm thick oak.

How much wastage do I need?

We generally recommend 10% wastage, however, this can be impacted by the room shape, laying style and other factors so always check with your installer first.

What joints do York planks have?

York flooring has tongue and groove joints.