A modern grey design capturing the feel of forest-fresh wood with visible sawn marks on a wood-effect vinyl board. Brecon Warehouse Oak is a strong and durable high-performance board that's waterproof, has a built-in underlay, and comes with a 25-year guarantee.
These are the questions we get asked most often about our floors and their features.
What are the markings on this floor?
This floor comes with realistic saw marks on the pattern. Please ask your local retailer to see some examples before purchasing if you’re unsure.
Does my Brecon floor need to acclimatise before installing?
Yes – We recommend you let your Brecon floor acclimatise for at least 24 hours before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.
What condition should the subfloor be in?
The surface immediately beneath a Woodpecker floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause Brecon flooring to distort.
Do I need to leave an expansion gap for my Brecon floor?
Not in normal living conditions (temperatures of 15-25°C). However, allow a gap of 2-3mm for Brecon floors where there is likely to be temperature variation beyond normal living conditions. Eg. conservatories
My Brecon floor has a scratch, how can I repair it?
The best way to conceal small scratches and marks on our Brecon range is with Scratchfix – a quick and easy method to restore scratches on resilient floors.
Do I need additional underlay with my Brecon floor?
No – Brecon floors have built-in underlay therefore additional underlay should not be used. This can create additional bounce which can damage the joints. If you need to raise the height of the floor then we recommend using plywood.
Is Brecon wood-effect or real wood?
Brecon is wood-effect flooring and as a result, it is waterproof. It has a stable mineral composite core and a resilient and slip-resistant vinyl.
Can I use Brecon flooring in a wet room?
No – Whilst Brecon is waterproof, long exposure to continuous water is not recommended, therefore bathrooms are fine but wet rooms would not be suitable.
Can I use this floor with underfloor heating?
Yes – You can use this floor with underfloor heating.
We generally recommend adding at least 10% on top for wastage, however, the plank type, laying pattern and room shape will have an impact on how much wastage is needed so it’s always best to consult with your installer first. Herringbone and chevron floors will typically need 15%-20% wastage.
Use our simple guide to learn how to get accurate measurements of your room.