Engineered Wood | Brushed and Matte Urethane
Engineered Wood | Brushed and Matte Urethane
SKU: 45-WAC-017
Add to Wishlist
Celebrating the beauty of dark and dramatic chocolate hues, dimmed with ashen hints and defined by white grain patterns, this handsome engineered floor will bring a sense of warmth to your room. The natural textures and tones are further enhanced through smoking, subtle brushing, and a matte urethane finish. Salcombe Shadow Oak also comes with a one-hundred-year guarantee.
| Pack Size | 31.09ft² |
|---|---|
| Bevels on Edges | All 4 edges |
| Core Material | Multi-Core |
| Finish | Brushed & Matte Urethane |
| Fitting Method | Floated |
| Floor Color | Dark |
| Floor Grade | Rustic |
| Floor Joint | Easiloc |
| Floor Thickness | 9/16 in |
| Floor Type | Real Wood Engineered |
| Hardness | Hard |
| Length | 74 3/4 in |
| Planks per Pack | 8 |
| Species | Oak |
| Tog Rating | 1.13 |
| Underfloor Heating | Suitable |
| Wear layer | 3mm |
| Width | 7 1/2 in |
These are the questions we get asked most often about our floors and their features.
Yes – We recommend you let your Salcombe floor acclimatise for 3 to 4 days before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.
Yes – Salcombe flooring is suitable for underfloor heating.
Salcombe flooring has easiloc/click-joints.
Salcombe can be floated only.
This means that at least one plank within your pack will be cut in half. This is intentional as it will help spread the joints out across your floor, thus helping prevent weakening. The other planks will be the same length.
As wood is a natural substance, it will expand and contract with changes in temperature and humidity. That’s why when a wood floor is fitted, expansion gaps need to be left wherever the boards meet a wall, structural support, stairs, breakfast bar, fireplace, central heating pipe…etc. Gaps must also be considered at doorways to allow for the differing expansion between rooms. Place spacers at regular intervals when fitting and then remove them before skirting boards, beading or trims are put in place. Allow a 2mm gap for every metre span of the floor with a minimum of 10-15mm gap regardless. For areas over 5m in width, extra provisions should be made for expansion.
The surface immediately beneath a Woodpecker natural wood floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause wood flooring to warp or shrink.
All of our Salcombe floors have a lacquered finish, therefore you can use our cleaning kit for lacquered floors. You may also keep it clean with a well wrung damp mop.
We generally recommend 10% wastage, however, this can be impacted by the room shape, laying style and other factors so always check with your installer first.
Salcombe flooring is 14mm thick with a 3mm wear layer of oak.
We generally wouldn’t recommend using engineered flooring in a bathroom.
