Goodrich Whitened Oak
Light in colour with a contemporary blend of ashen and flaxen tones, these boards marry striking rustic character with varying natural hues. A classic herringbone design enhanced by brushing and a matt urethane finish.
Engineered Wood | Brushed and Matte Urethane
Engineered Wood | Brushed and Matte Urethane
SKU: 32-GWH-001
Add to Wishlist
Light in colour with a contemporary blend of ashen and flaxen tones, these boards marry striking rustic character with varying natural hues. A classic herringbone design enhanced by brushing and a matt urethane finish.
Pack Size | 13.95ft² |
---|---|
Bevels on Edges | All 4 edges |
Core Material | Multi-Core |
Finish | Brushed & Matte Urethane |
Fitting Method | Floated, Glued, Nailed |
Floor Color | White |
Floor Grade | Rustic |
Floor Joint | Tongue & Groove |
Floor Thickness | 5/8 in |
Floor Type | Real Wood Engineered |
Hardness | Hard |
Length | 15 3/4 in |
Planks per Pack | 36 |
Species | Oak |
Tog Rating | 1.13 |
Underfloor Heating | Suitable if Glued Down |
Wear layer | 4mm |
Width | 3 1/2 in |
These are the questions we get asked most often about our floors and their features.
You can lay this Goodrich floor as single herringbone, double herringbone, ladder pattern, 90-degree angle, or brickbone pattern. It can also be laid as a border around a section of Goodrich herringbone.
Yes – We recommend you let your Goodrich floor acclimatise for 3 to 4 days before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.
The surface immediately beneath a Woodpecker natural wood floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause wood flooring to warp or shrink.
As wood is a natural substance, it will expand and contract with changes in temperature and humidity. That’s why when a wood floor is fitted, expansion gaps need to be left wherever the boards meet a wall, structural support, stairs, breakfast bar, fireplace, central heating pipe…etc. Gaps must also be considered at doorways to allow for the differing expansion between rooms. Place spacers at regular intervals when fitting and then remove them before skirting boards, beading or trims are put in place. Allow a 2mm gap for every metre span of the floor with a minimum of 10-15mm gap regardless. For areas over 5m in width, extra provisions should be made for expansion.
Goodrich flooring is 15mm thick with a 4mm real oak wear layer.
All of our Goodrich floors have a lacquered finish, therefore you can use our cleaning kit for lacquered floors. You may also keep it clean with a well wrung damp mop.
Patterned flooring such as herringbone or chevron is generally much more complex to install than traditional straight plank. This is because the pattern needs to be measured and laid perfectly, otherwise you will end up with gaps. Therefore we recommend choosing an installer who has plenty of experience.
Whilst this board is rustic, it will generally have fewer knots than a rustic traditional straight plank board as herringbone boards are much smaller, therefore large knots can weaken them.
Yes – Goodrich is suitable when fully stuck down.
Goodrich can be floated, glued or secret nailed.
Goodrich floors have tongue & groove joints.
We generally wouldn’t recommend using engineered flooring in a bathroom.
We would recommend 10-15% wastage for Goodrich floors, however, this can be impacted by the room shape, laying style and other factors so always check with your installer first.